Steel City Archer
New member
^^^^^^^^^^^^^^^^^
Post Pics Of Your Hunting/Predator/Varmit AR Here !!
- Thread starter Trailtracker
- Start date
Just completed my latest build. It is a 270AR the round was developed by Harrison at AR15Performance. he let me buy a reamer so i could make this custom.
it is a 26" krieger barrel -- may shorten to 24 with a 17" rail barrel is tungsten cerekote, Luth ar stock Lars ops 4 ambi side charger, psa lower with ssa-e trigger. first run had 130 bergers at 2900. have changed the optics to a vortex 4-16 pst.
it is a 26" krieger barrel -- may shorten to 24 with a 17" rail barrel is tungsten cerekote, Luth ar stock Lars ops 4 ambi side charger, psa lower with ssa-e trigger. first run had 130 bergers at 2900. have changed the optics to a vortex 4-16 pst.
NYyotekiller
New member
Originally Posted By: BIGGDAWG
[/URL]
Sweet lookin' pea shooter you got there.
Sweet lookin' pea shooter you got there.
GRIZZLYONE
New member
My new LWRC IC Enhanced. Aint even been out to the range with it yet. Grizz
realhunter
New member
25-223AR
.257 Nosler SBBT at 2750 thumps em perty good!
.257 Nosler SBBT at 2750 thumps em perty good!
kyyotestalker
New member
My do all Precision/Long Range/Varmint AR! I started with a 16" Sig Sauer M400 Carbine and added parts as follows!
Safarie Land Super Stock (Rogers stock)
Geissele SSA-E Trigger
Midwest Industries Gen II SS Rifle Length Float Tube
Voltor Low Profile Gas Block
American Defense 20moa Recon Mount
Nightforce NXS 3.5-15x50 NP-R1 HS
Still awaiting the following!
KAC Adjustable 200-600 Meter Micro Folding Sights
Rainier Arms 16" Select Match Stainless Fluted 8 Twist 223 Wylde Barrel
VG6 Gamma 556 Muzzle Device
Magpul MOE Aluminum Trigger Guard and MIAD 1.1 Grip
Nightforce NXS Compact 1-4x24 FC-3G Optic Instead of the 3.5-15x50 NXS
Safarie Land Super Stock (Rogers stock)
Geissele SSA-E Trigger
Midwest Industries Gen II SS Rifle Length Float Tube
Voltor Low Profile Gas Block
American Defense 20moa Recon Mount
Nightforce NXS 3.5-15x50 NP-R1 HS
Still awaiting the following!
KAC Adjustable 200-600 Meter Micro Folding Sights
Rainier Arms 16" Select Match Stainless Fluted 8 Twist 223 Wylde Barrel
VG6 Gamma 556 Muzzle Device
Magpul MOE Aluminum Trigger Guard and MIAD 1.1 Grip
Nightforce NXS Compact 1-4x24 FC-3G Optic Instead of the 3.5-15x50 NXS
Song Dog Down
New member
If I remember correctly, this was a Dedicated Technologies 243 WSSM. It's been a while since I saw that old set of photos. Hoe that helps Coyote man050.
RealSlimBrady
New member
Here is my 6.5 Grendel. Not the best pic and no scenery to go with it.
GRIZZLYONE
New member
Double post
Will_Power
New member
Being new to the community here, I figure it's only right that I share what I brung.
Build List
[*]20" 1:7 SDM-R White Oak barrel, .223 Wylde chamber, M4 feed ramps[*]BE Meyers flash hider[*]PRI flip-up gas block[*]Seekins SP3R flat-bottomed handguard[*]Harris BRM-S bipod affixed via a PWS KeyMod Bipod adapter (set the bipod too far back; replaced with a Noveske TRX mount)[*]Anderson forged lower[*]Gieselle SSA-E trigger[*]BCM lower parts kit[*]Rock River Winter Trigger Guard[*]YHM EZ Pull extended takedown pins (it's a little thing, but I love them)[*]LaRue A-PEG pistol grip[*]White Oak milspec forger upper with M4 cuts[*]Wilson milspec, staked, and HPT/MPI bolt carrier and bolt[*]BCM Gunfighter Mod 3 (large) charging handle[*]Mappul MOE Rifle fixed stock (with additional QD socket kit that it doesn't come with)[*]Magpul backup rMBUS rear sight[*]Leupold Mark 2 one-piece picatinny scope mount[*]Primary Arms 4-14x44m FFP Mil/Mil scope (yeah, it's a cheap $230 scope and more than I need with a .223, but I have yet to read anyone that's had a problem on a .223-.308 class gun - lots of good reviews, and I've been pleased with it so far. Clicks could be a little more firm, but the glass is better than I expected. It'll do for now until I upgrade later this year).[/list]
Not Shown (aka I need to take a new photo)
[*]Magpul PRS (balances out the weight of the barrel really well)[*]Bobro QD mount (Getting the scope installed was a pain, but the mount has high marks for a reason)[*]Knights 200-600m rear sight (very, very nice) [/list]
Build List
[*]20" 1:7 SDM-R White Oak barrel, .223 Wylde chamber, M4 feed ramps[*]BE Meyers flash hider[*]PRI flip-up gas block[*]Seekins SP3R flat-bottomed handguard[*]Harris BRM-S bipod affixed via a PWS KeyMod Bipod adapter (set the bipod too far back; replaced with a Noveske TRX mount)[*]Anderson forged lower[*]Gieselle SSA-E trigger[*]BCM lower parts kit[*]Rock River Winter Trigger Guard[*]YHM EZ Pull extended takedown pins (it's a little thing, but I love them)[*]LaRue A-PEG pistol grip[*]White Oak milspec forger upper with M4 cuts[*]Wilson milspec, staked, and HPT/MPI bolt carrier and bolt[*]BCM Gunfighter Mod 3 (large) charging handle[*]Mappul MOE Rifle fixed stock (with additional QD socket kit that it doesn't come with)[*]Magpul backup rMBUS rear sight[*]Leupold Mark 2 one-piece picatinny scope mount[*]Primary Arms 4-14x44m FFP Mil/Mil scope (yeah, it's a cheap $230 scope and more than I need with a .223, but I have yet to read anyone that's had a problem on a .223-.308 class gun - lots of good reviews, and I've been pleased with it so far. Clicks could be a little more firm, but the glass is better than I expected. It'll do for now until I upgrade later this year).[/list]
Not Shown (aka I need to take a new photo)
[*]Magpul PRS (balances out the weight of the barrel really well)[*]Bobro QD mount (Getting the scope installed was a pain, but the mount has high marks for a reason)[*]Knights 200-600m rear sight (very, very nice) [/list]