Post Pics Of Your Hunting/Predator/Varmit AR Here !!

I just finished this build today. On the upper is a VLTOR MUR 1S upper receiver, 18" McGowen stainless fluted 1/8 twist barrel, , JP 15 1/2" tub, BCM charging handle, Surefire muzzle device (this is temporary until I get my AAC can mount) and a Young National Match BCG. The lower is a LMT with the obvious MAGPUL furniture with a Geissele SSA trigger.

Now I have to get it ready to paint and I have to find a good deal on a Leupold MR/T piece of glass with a illuminated reticle....
cool.gif


DSC_0568_zps5437d326.jpg

DSC_0571_zps7a17eccf.jpg

DSC_0575_zps2790cd31.jpg
 
Last edited:
ef360c8b-d5b5-4e4a-9014-b770712047cd_zps51f5eebc.jpg


Cheap scope swapped out for a Leupold VX-Hog 1-4x20, & the brake gets replaced with an AAC Blackout flash hider once this next 3 gun match is over.
 
Originally Posted By: JFreulerI just finished this build today. On the upper is a VLTOR MUR 1S upper receiver, 18" McGowen stainless fluted 1/8 twist barrel, , JP 15 1/2" tub, BCM charging handle, Surefire muzzle device (this is temporary until I get my AAC can mount) and a Young National Match BCG. The lower is a LMT with the obvious MAGPUL furniture with a Geissele SSA trigger.

Now I have to get it ready to paint and I have to find a good deal on a Leupold MR/T piece of glass with a illuminated reticle....
cool.gif


DSC_0568_zps5437d326.jpg

DSC_0571_zps7a17eccf.jpg

DSC_0575_zps2790cd31.jpg
got the same set up on my upper, that Vltor upper and Young Bolt is a sweet match
 
Nothing special. Just a stock Colt AR15 MT6700 Match Target Competition HBAR with a little trigger work. Removable handle so I can mount a $100 Tasco Mil-Dot 3-9x40mm scope.
 
Rock River Arms Predator Pursuit 16", ACE skeleton stock, Burris PEPR, Simmons Predator Quest 4.5-18, Pmag 20 round magazine limited to 5 rounds.

 
A mix of parts or a Frankenstien AR15 I put together.

Lothar Walther 223 Wilde barrel, RRA upper, Mega lower, JARD Trigger, etc...

 
Originally Posted By: rabiddog
hunting052.jpg

this is my Californistan Compliant version, i have a ER shaw barreled 20"HBAR Fluted A-4 upper w/A-2 flashider topped that off with a Weaver V-10 50mm scope.
is an MOA AR it'll be better than that when i order a better trigger.
although there are 3 coyotes that could'nt tell the difference.

what buffer are you running in your rifle ?
 
My new AR in .204 Ruger:
The lower is a RRA with Magpul grip and ACS buttstock, and the upper is one my gunsmith put together for me. The upper and scope are Duracoated in "Magpul Foliage Green."

The barrel is a Shilen 20" 1 in 9 twist that I found on Gunbroker. We used a Daniel Defense upper receiver and handguard. The scope is a Bushnell Elite 6500 2.5-16 mounted i a JP mount.

So far I've put about 120 rounds through it during break in and so far I'm pleased with the accuracy. I'll start more load development soon......

Thanks for looking.

George

 
Originally Posted By: Vartarg217My new AR in .204 Ruger:
The lower is a RRA with Magpul grip and ACS buttstock, and the upper is one my gunsmith put together for me. The upper and scope are Duracoated in "Magpul Foliage Green."

The barrel is a Shilen 20" 1 in 9 twist that I found on Gunbroker. We used a Daniel Defense upper receiver and handguard. The scope is a Bushnell Elite 6500 2.5-16 mounted i a JP mount.

So far I've put about 120 rounds through it during break in and so far I'm pleased with the accuracy. I'll start more load development soon......

Thanks for looking.

George

l]

I just got the same barrel and had it threaded . Got it on gunbroker as well from a guy in Sherman tx. Shoots pretty darn good . If I don't have any bullets I could just use it as a beating stick it's so long !

541CDD44-0E04-495C-84FD-640A199F2E21-200-00000005A302512E_zps0c5abd43.jpg
 
Last edited:
Hi all.

Here are my pred takers.

Left - LWRC REPR 16" B5 systems sopmod stock 7.62x51/308win, magpul maid, DNZ One piece scope mount (LOVE these mounts), Nikon Monarch 3 4-16x50 BDC reticle. I am waiting for it cool down to begin load development with it. I am a big nosler fan, really want to get my hands on some 190gr accubond long range bullets to play with!!

Right (wife's plinker)- Diamond Back DB15B 16" 5.56/223. 700 lumen light, DNZ One piece scope mount, Nikon M223 2-8x32 w/BDC 600 Reticle. This gun is still in load development. I have 300 test rounds loaded just waiting for temps to cool down (nosler BT, Hornady vmax, fmj, SP, and GMX)

20130826_203541.jpg


20130826_203757.jpg


20130826_203622.jpg


20130826_202723.jpg


20130826_202802.jpg


20130826_202750.jpg


 
Last edited:
6.8 SPC II
WOA 16" Mid length, 11 Twist 4 groove, Flutted/Threaded
WOA BCG
Quentin Defense Match Billet Upper/Lower
YHM customizable FF Tube
YHM Quick detach/YHM 7.62 Phantom
PRI gas Block/Tube
Burris PERP/Vortex PST 4-16x50mm EBR-1
Magpul ACS/Grip
BCM Gunfighter Mod 4










 
Back
Top