ELD-VT 80 grain 6mm Creedmoor Factory ammo

Heretic

Heretic

Active member
Took the Custom Shop RPR out today, 91F, pretty windy. I just wanted to chrono some hand loads, figured I bring some factory ammo along with my handloads.

Specifics for each load in the graphs. The third one over just blew me away, best numbers I ever seen for factory ammo. Hornady has done a fine job recently bringing accurate ammo to market. The ELD-M 108 grain Match ammo shot just over .6 from the same rifle.

1726440273785.png
 
Heretic said:
Took the Custom Shop RPR out today, 91F, pretty windy. I just wanted to chrono some hand loads, figured I bring some factory ammo along with my handloads.

Specifics for each load in the graphs. The third one over just blew me away, best numbers I ever seen for factory ammo. Hornady has done a fine job recently bringing accurate ammo to market. The ELD-M 108 grain Match ammo shot just over .6 from the same rifle.

View attachment 10474
Click to expand...
Have you used that 80 grain Eld-VT on a coyote yet? The 108 eldm left a little bigger hole in them than I’d prefer.
 
Just loaded a few up with 45 and 45.5 gr of H4350. I’m using 1x fired hornady brass, fed 210 and I guessed in seating depth (basically a little longer than hornady’s rec on the 80 CX bullet). I only shot 5 round groups but I’d say it’s off to a good start. I’ll use my Alpha LRP brass in the next loading. 3417 fps is pretty deadly for my standards, especially coming from my success with the slower 108 eldm.
IMG_8112.jpeg
 
Back
Top