22 creed brass

[sandman22250]

Anyone making 22 creed brass I seen a video 6.5 creed to 22 creed just wondering if anybody else has done it I don’t presently have any 22 Creed brass but I have lots of 65 and wanted to know if it was easy to do. Thank you everyone

 

[SupressYourself]

Personally, I would just buy the most excellent Alpha 22 Creed brass.

Same difference: I've done 6.5 Grendel to 22 ARC with one swipe of a 22 ARC FL die. It works fine, but the necks end up a little thicker, which could cause issues depending on the neck clearances of your chamber.

 

[Lazer32]

Peterson, Alpha and Hornady make brass for 22 CM. I have never shot Peterson brass but I have shot Alpha in 6GT and its excellent. Hornady brass is ok in a pinch but I find the primer pockets fail before anything else.

 

[NevadaZielmeister]

Peterson, Alpha and Hornady make brass for 22 CM. I have never shot Peterson brass but I have shot Alpha in 6GT and its excellent. Hornady brass is ok in a pinch but I find the primer pockets fail before anything else.

Yes, that has been my experience as well with Alpha and Hornady. Alpha is excellent. Hornady is second to last best. Really sucks.

 

[Lazer32]

Anyone making 22 creed brass I seen a video 6.5 creed to 22 creed just wondering if anybody else has done it I don’t presently have any 22 Creed brass but I have lots of 65 and wanted to know if it was easy to do. Thank you everyone

I think if you size it down you would have to neck turn the brass. It's doable but might be more work than you're looking to do.

 

[sandman22250]

I think if you size it down you would have to neck turn the brass. It's doable but might be more work than you're looking to do.

That’s exactly what I was thinking that it might be more work than it’s worth but if it turns out to be easy Then I got about a couple 100 6.5 I could form

 

[TXCOONDOG]

You should not have any issues with resizing 6mm and/or 6.5 Creed. I wanted the 22 Creed headstamp and went with Alpha brass because it is known to be tough and consistent

 

[sandman22250]

Personally, I would just buy the most excellent Alpha 22 Creed brass.

Same difference: I've done 6.5 Grendel to 22 ARC with one swipe of a 22 ARC FL die. It works fine, but the necks end up a little thicker, which could cause issues depending on the neck clearances of your chamber.

Definitely no wanting to turn any necks going to order some brass this week

 

[sandman22250]

Peterson, Alpha and Hornady make brass for 22 CM. I have never shot Peterson brass but I have shot Alpha in 6GT and its excellent. Hornady brass is ok in a pinch but I find the primer pockets fail before anything else.

Thank for the info I’ll take a look for that alpha brass

 

[sandman22250]

You should not have any issues with resizing 6mm and/or 6.5 Creed. I wanted the 22 Creed headstamp and went with Alpha brass because it is known to be tough and consistent

I’ll check out the alpha brass see if I can find a 100 thank you

 

[TXCOONDOG]

I’ll check out the alpha brass see if I can find a 100 thank you

Blue Collar Reloading currently has Alpha in small and large primer brass

 

[El Jefe]

I’ll add to the comments on not worrying about squeezing down 6.5 or 6mm to 22. Not enough of a difference in the diameters to worry about and neck turning unless you have a special chamber.

 

[sandman22250]

I’ll add to the comments on not worrying about squeezing down 6.5 or 6mm to 22. Not enough of a difference in the diameters to worry about and neck turning unless you have a special chamber.

Thank you I’ll just try a couple as soon as the dies come in I’ve got a few 6.5 creed to sacrifice lol

 

[El Jefe]

If nothing else it gives you the experience and ability to form brass so when availability ever becomes a problem it allows you to continue to shoot. If using 6mm I would just go with a simple pass through the sizing die. If using 6.5 I would try annealing them first to help things along.

 

[TXCOONDOG]

Anyone making 22 creed brass I seen a video 6.5 creed to 22 creed just wondering if anybody else has done it I don’t presently have any 22 Creed brass but I have lots of 65 and wanted to know if it was easy to do. Thank you everyone

Have you decided on a bullet yet? I have the 62 VLD-VT, 75 grainers and 80 ELD-X to try myself which I bought months ago with dies, brass etc. before I even ordered a 22 Creed barrel. Seems to be a lot of mix results with the VLD-VT from runners, spinners, they do too much damage to they're just right.