18" 243 suppressor recommendations

[timn]

I put a banish 30 on my 243ar10 and it's really quiet.

 

[Buckhead]

Watching this thread. Have a 18.5”Rem Model 7 at the gunsmith being threaded. Will use with an Omega 300.

 

[sethperry]

Watching this thread. Have a 18.5”Rem Model 7 at the gunsmith being threaded. Will use with an Omega 300.

So from what I have found out since I posted this is.... nomad-L, resilient jolene, otter creek labs hydrogenL 6.5 are pretty much on the top an the AB raptor 10 with 5" reflex mount being a little better tone, CAT johnny law an thunder beast (magnus)? are great but are pretty expensive...
Diligent defense enticer L is right there with the nomad L an jolene..
Probably missed a couple decent ones but those seem to be a solid choice for bolt actions...

 

[Hunter55]

there's alot of info floating around out there re: suppressors or silencers.
sound signature review

 

[alf]

there's alot of info floating around out there re: suppressors or silencers.
sound signature review

That's a great resource, I've used it a bunch in the past.

 

[Hunter55]

and when you think in terms of decibels, the sound of a human breathing is only 10db. Many of these suppressors only vary 2-3 db.

 

[Hunter55]

delete

 

[Shotinthedark]

Not sure what you decided upon
I will assure you if you want the very best in design , construction, technology , savings and performance
Simply buy the AB Warthog in 30 cal....install a Reardon Atlas XL rear hub ...and get some Reardon or FPM
Precision Breaks ....and you can bounce that can around on your rifles..

I have 5 of them and 1 Raptor 10 ring with 5" Reflex ...
You cannot beat an AB Suppressor ....

Right pic is a Warthog 8 ring 30 cal with Reardon Atlas XL rear Hub and an FPM Precision Spleen Splitter
Matt made me some custom 5/8 x 24 TPI in 22 cal bore ....now stocks them ...
Top Notch !

 

[Shotinthedark]

Id skip the Raptor as they took 7 months to get me mine and still screwed up the order
The Warthogs are readily available and 500 or less.....add the Reardon and Break and you
are GTG !

 

[Buckhead]

Watching this thread. Have a 18.5”Rem Model 7 at the gunsmith being threaded. Will use with an Omega 300.

Got my Model 7 back from the gunsmith. While sighting in my scope, chronoed some 100 gr Sako factory loads. Sako claims 2969 fps. I averaged 2765.

Suppressor worked well. Sounded like a HV .22 LR.

 

[joe777]

That ain't bad. This is out of my 22" suppressed with 95gr.

 

[Ermine.]

Thunderbeast cans are near the top in my opinion. Lightweight quiet and accurate