Reply to thread

Message

I've got the feeding and ejection issues worked out. Working the bolt fast was ejecting my Lapua brass all over the place which can be an issue hunting/standing in water and tall grass. By using a cantilever AR mount, I was able to mount a Cadwell brass catcher and I can turn the mount backwards so my Pulsar Thermion 2 Pro will work with the brass catcher. I need to find a manufacture that makes extra high 30mm rings (must be 1.5" high) which will give enough clearance to allow for the brass to be mounted under the body of the scope on my other Savage, Bergara and 700 rifles too.[ATTACH=full]11072[/ATTACH][ATTACH=full]11073[/ATTACH]

[QUOTE="TXCOONDOG, post: 3360823, member: 36603"] I've got the feeding and ejection issues worked out. Working the bolt fast was ejecting my Lapua brass all over the place which can be an issue hunting/standing in water and tall grass. By using a cantilever AR mount, I was able to mount a Cadwell brass catcher and I can turn the mount backwards so my Pulsar Thermion 2 Pro will work with the brass catcher. I need to find a manufacture that makes extra high 30mm rings (must be 1.5" high) which will give enough clearance to allow for the brass to be mounted under the body of the scope on my other Savage, Bergara and 700 rifles too.[ATTACH type="full"]11072[/ATTACH][ATTACH type="full"]11073[/ATTACH] [/QUOTE]

Verification