6mm DTI load data help

[seasley]

I have copied all data on this board for the 6 DTI and needing some more load date

Just picked up a 22” 12 twist upper from another member, and need some load data with the same twist

All help will be greatly appreciated

 

[DiRTY DOG]

If you can't find what you're looking for between here and Dtech's load data, then use 6x6.8 data a a guide. The two cartridges are virtually identical and the loads are pretty much interchangable.

 

[tj66]

55 gr NBT's over 30.5 gr H322 in Hornady brass. 3550 fps 22" 12 twist 6DTI. Step it up a little if using SSA brass or S&B as Hornady has less capacity.

 

[seasley]

Yes. I am using SSA brass

I have 400 round or so of that

Looking at using 53 grain vmax, or nosler

 

[tj66]

Wasn't aware that they make a 53 vmax in 6mm. Did you mean 58 vmax? If so use the same load. In mine with SSA brass it liked 31 gr H322 with 58's/55's. Or 31.5 of 8208 shot well also just slower.

 

[seasley]

58 grain, sorry, my fat fingers made a typo